Electrical Repair and Install

Electrical Repair

Electrical Repair

Undertaking electrical repairs on your own is never advisable unless you have an adequate amount of ability and experience. Whether it’s a blown bulb or electrical shortage, we have the expertise to aid with any necessary electrical work required to make you safe.

We have electricians who are available 24/7,no matter the emergency, we’ll always assure that any remedial work is fully priced and authorised by you first. To minimise disruption to your home or workplace, our electricians use shoe covers and dust covers wherever required, and will make sure to clean up completely once work is finished.

Our electricians are NICEIC Approved Contractors, It also means that all of our technicians have been taught and assessed to the highest standard, with all work adhering to Wiring Regulations British Standard 7671 and Part ‘P’ of the Building Regulations for England and Wales.

Safety with Precision

Keeping our customers and staff is our number one priority. We will carryout an electrical safety test with every callout, to assure that all electrical fittings in your home or workplace comply with the relevant safety regulations. We have a duty to notify you of anything that poses a danger to your safety – such as exposed cables or an overheated fuse\breaker – and notify on the resolutions available to you, this willl enable you to make an informed choice.

How we can help
We first establish how quickly you need any corrective work completed. If the issue poses an immediate risk to your safety – for example, a sparking fuse box – we’ll send one of our electricians immediately. However, if you wish to repair a faulty plug-socket, your requirement for emergency assistance will not be as high. Either way, we always work to a suitable time that you are happy with. Some of the most well-known repairs we can assist with:

Flickering Lights

If your lights are , buzzing, flickering, it could mean that the wattage is wrong. There could be a bad connection between the lamp and the switch. If substituting the bulb doesn’t help, we will be able to ascertain the root cause and get your lights operating correctly.

Power Cuts

A power cut can be irritating at the best of times, but it could also mean there’s a fault with the wiring in your home or workplace. Sometimes it will just be a case of operating the relevant switch in your fuse board (consumer unit) , however if you’re uncertain of the problem or would rather not take the chance, calling Precision is the safest route of action. Our electricians will be able to diagnose the problem and implement a fix, or, if necessary, heighten it to your electricity provider.

Electrical Device Arcing

If you detect a weird fishy smell (ozone being burnt) or a smell of smoke from a switch or wall socket, it may mean that the connection to an electrical device’s circuit has been broken – generally known as ‘arcing’. When this occurs, the electricity will jump to make the circuit, which can result in a fire. Our local proximity and 24/7 coverage gives us the ability to respond quickly in such cases.

Electrical installations will need remedial attention of some kind due to general wear and tear. The safest way to ascertain if a repair or maintenance is required is to use a qualified electrician who will be able to distinguish any faults or hazards while inspecting the electric system. Precision's electrical teams provide world-class service. They go the extra mile to ensure that all of our customers have a positive experience. That is why we have customers dating back to 2006, the following list is why they keep coming back.....

  • All work guaranteed
  • Reliable & Trustworthy
  • Same-day appointments available
  • Emergency & routine maintenance
  • Local, fully qualified & experienced
  • £5 million Public Liability Insurance
  • Household, Commercial & Industrial
  • NICEIC & NAPPIT accredited electricians

 

From PAT testing to entire building rewires. Precision provides a comprehensive electrical service. Many electricians are only qualified for residential work. All Precision's engineers are qualified to an extremely high level. This is why we can also offer Commercial Electrical Services.

  • Emergency callout
  • Out of hours test and repair
  • Repair and Installation Services
  • Designs with energy-saving factors built-in
  • Legally compliant, giving you total peace of mind
  • Test and Inspection by commercially qualified electricians

Call today to book your engineers visit 08000 24 11 24

Precision has commercially qualified electrical engineers. We provide electrical test and inspection, remedial works and also complete rewires. Alongside our electrical engineers, we have qualified team members who can carry out PAT testing and even Lightning Conductor ground earth testing.

Under current UK Electrical regulations BS 7671 (IET Wiring Regulations) , any building open to the general public and workplaces require regular electrical testing of the cabling, switches, sockets and protective equipment; this test is called an Electrical Inspection Condition Report.

Under most circumstances, this should be carried out every five years although some local authorities demand extra testing.

​Precision Safety Services qualified electrical engineers, will explain the testing process in detail.  They can complete this important work for you. You will receive a full technical report and summarised plain English document explaining any remedial actions that may be required.

We guide you through the process of prioritising your action points and, if required, can also assist with the corrective action to deliver a solution, rather than just leave you with the problem.

As advised by the Health and Safety Executive (HSE), repairs should only be carried out by a competent person, someone who has the requisite skills, expertise and experience to carry out the work safely.

In this setting, a competent person is someone who has suitable training, skill and knowledge for the duty to be undertaken to prevent harm to themselves and others.

Common faults encountered in dwellings is improper electrical wiring, and one of the main causes of electrical fires is faulty and ageing wiring in the home.

Some of the most typical electrical wiring problems involve inadequate overload protection, inadequate electrical service and improper earthing.

Some of the typical warning signs include burning smells, sounds of buzzing or crackling, fuses blowing or circuits tripping.

Improper electrical wiring not only puts the inhabitants at great risk of being electrocuted but also enhances the chances of electrical fires.

Many factors can have an impact on the wear and tear of your electrical installation. Including the materials used and how your premises has been used.

The NICEIC would recommend that a periodic inspection is carried out on owner-occupied premises at least every ten years and every five years in rented accommodation. The examination will confirm whether the electrics in a property are safe and inform you if anything needs upgrading.

It would be best if you carried out routine checks around the house on the condition of your wires, switches, sockets and other electrical fittings. If you see anything unusual – get a certified electrician to check your electrics as soon as practicable.

Circuit Fault Finding
Qualified Engineers who will test and inspect your Fire Systems

Many electrical devices stop working without causing any serious problems. However, a fault either within the mechanism or with its supply cabling will cause it to pose a tangible risk. Electrical failures may also be caused by human error – such as someone cutting a cable or a cable melting if inadvertently located close to a heat source. More and more insurers have also associated rising house fires to electrical faults caused by forged telephone chargers.

Landlords must assure:

• Extension leads and sockets are not overloaded with numerous appliances. It is recommended to use one plug per socket

• Residual Current Detection RCD protection on fuses should be fitted to assure electrical equipment does not lead to serious shocks, and that it trips out when the test button is operated

• Broken socket covers, cables or plugs should be replaced promptly

• Protective earth bonding should be put in place so that electrical faults do not lead to electrical shocks or fires

• Suitable cables are used for all devices, and that circuit breakers and fuses are correctly rated

• Make sure appliance covers, casings and cables are not tattered or otherwise damaged, as they could pose a fire hazard or lead to an electrocution

• Ensure that the area surrounding your fuse-boards is free of any combustible materials

• light fittings, plug sockets, switches and other fittings are fixed securely

• Take prompt action when electrical problems are uncovered

• Make sure cables are in a practical position and are not likely to undergo any damage

• Make sure you have smoke detectors fitted on every floor of the house and regularly check them to make sure they work

• Check that audible Carbon Monoxide alarms are situated in every room that has a fuel-burning appliance, and that they work when tested

• Arrange an examination of the property’s electrical installation once every five years. This is legally compulsory for houses in multiple occupations (HMOs), and are highly recommended in other rented premises

• Only use certified engineers, and confirm that all building and electrical work complies with Part P of the Building Regulations, our commercially rated engineers achieve this

• Make sure all electrical appliances provided to tenants are PAT tested regularly

• Acquire electrical items from a trustworthy source and check that they have a British or European safety (BS or CE) mark when purchasing

• Encourage residents not to cover things when charging them as they transmit heat and not to leave them charging unsupervised

We complete out all electrical works including rewiring, test and repair, fault finding and more. All work is carried out to all mandatory standards and regulations by our skilled and trustworthy team. On completion, all works will receive a certification to demonstrate that it is safe and meets standards and regulations.

We are an Approved Contractor and Commercial Installer registered by NICEIC and as such we are fully compliant with the appropriate technical and safety standards, codes of practice.

You can rest assured that we are fully covered by Liability Insurance with public and employers liability cover.

We are also approved to self-certify our work to the Local Building Control Body.

We have extensive experience working with estate agents and private landlords in London and have a broad knowledge of their rental and property management requirements.

We provide you with no-obligation quotation for the required works.

Call Now Button

We guarantee to beat any like for like quotation.

Our pricing ethos is based on modest profits with long term relationships. Please send us a copy of the cheaper quote, if it is like for like we guarantee to beat it.

MORE INFORMATION